SECURE ONLINE CHECKOUT
First Fence Logo
  
Same & Next Day Delivery
  
24/7 Sales Line
Strong approved UK Supply Chain
  
Locations Nationwide
  
Competitive Pricing
product not found
Images shown are for illustration purposes only and may differ slightly
Goods Total
Quantity:
1
Total:
£0.00
£0.00

FF6000HD - 9.0m Pole Automatic Barrier

SKU: SPEC-BAR-0100
product not found
Images shown are for illustration purposes only and may differ slightly
£2,970.00
Each
£3,564.00 Inc VAT
£3,564.00 Inc VAT
product not found
Images shown are for illustration purposes only and may differ slightly
Qty
Pole length9.0 Metres Plain Pole Only 8.0 Metres with Bottom Skirt 6.5 Metres with Hi-Bar
Opening/ Closing Time4.0-9.0 Seconds (Adjustable)
Power SupplySingle Phase 230v 50Hz 4.0 Amps
Drive Unit3 Phase Motor & Wormed Gearbox
FinishAluminium & Polyester Powder Coated
AccessoriesPre-Wired Loop Detector Bases
Springs/ Counter WeightsNOT REQUIRED
Cycles100% Continuous Duty Cycle Rating
Control PanelProgrammable PCB & Inverter Driven
Boom Diameter115mm x 80mm Oval
Safety Edge Controller Direct Connection of Separate 8.2K? Safety Contact Edge
Dimensions454mm x 473mm x 1175mm
Ambient Humidity-10 ~ 55 Degrees Centigrade
FixingsM16 Anchor Shield Bolts Included
Control Panel IP RatingIP57
SettingsProgrammable Configuration as Standard

Specification

Pole length9.0 Metres Plain Pole Only 8.0 Metres with Bottom Skirt 6.5 Metres with Hi-Bar
Opening/ Closing Time4.0-9.0 Seconds (Adjustable)
Power SupplySingle Phase 230v 50Hz 4.0 Amps
Drive Unit3 Phase Motor & Wormed Gearbox
FinishAluminium & Polyester Powder Coated
AccessoriesPre-Wired Loop Detector Bases
Springs/ Counter WeightsNOT REQUIRED
Cycles100% Continuous Duty Cycle Rating
Control PanelProgrammable PCB & Inverter Driven
Boom Diameter115mm x 80mm Oval
Safety Edge Controller Direct Connection of Separate 8.2K? Safety Contact Edge
Dimensions454mm x 473mm x 1175mm
Ambient Humidity-10 ~ 55 Degrees Centigrade
FixingsM16 Anchor Shield Bolts Included
Control Panel IP RatingIP57
SettingsProgrammable Configuration as Standard

Location & Function

This Heavy Duty Automatic Barrier has an arm length of 9.0m, providing automated and secure access to cars and HGVs entering your site. Provided with this barrier is a Control Panel which can be individually programmed to multiple factors, including adjustable rising arm speed.

Easy to install and with a low maintenance design, this barrier is ideal for a wide range of locations.

Motor and Operation

  • This barrier has a 100% Continuous Duty Cycle through its Single Phase Supply, 3 Phase Motor and Two Stage Gear Box.
  • The programmable Control Panel is Inverter Driven and comes with Fault Diagnostic on-screen display, with the Adjustable Speed, Acceleration and Deceleration for arm operation.
  • A Manual Override is also included in case of power failure, as well as an 8.2K? Safety Contact Edge. Ready for Loop Detectors to be installed, this barrier comes pre-wired for Single Channel Access Control.
  • Due to the operation of this barrier, no springs or counterweights are needed, as it has Heavy Duty Roller Plunger Limit Switches.

Construction and Materials

  • Aluminium Extruded Cabinet
  • Removable Cast Aluminium Hood
  • Heavy Duty Pillar Box Bearing
  • Comes with M12 Anchor Shield Bolts for installation.

Access Control & Other Accessories

From the Access Control Guide below, this Barrier is compatible with the following accessories:

  • GSM Intercom
  • Proximity Access Keypads
  • Reader Pedestals
  • Loop Detectors & Loop Wires

Location & Function

This Heavy Duty Automatic Barrier has an arm length of 9.0m, providing automated and secure access to cars and HGVs entering your site. Provided with this barrier is a Control Panel which can be individually programmed to multiple factors, including adjustable rising arm speed.

Easy to install and with a low maintenance design, this barrier is ideal for a wide range of locations.

Motor and Operation

  • This barrier has a 100% Continuous Duty Cycle through its Single Phase Supply, 3 Phase Motor and Two Stage Gear Box.
  • The programmable Control Panel is Inverter Driven and comes with Fault Diagnostic on-screen display, with the Adjustable Speed, Acceleration and Deceleration for arm operation.
  • A Manual Override is also included in case of power failure, as well as an 8.2K? Safety Contact Edge. Ready for Loop Detectors to be installed, this barrier comes pre-wired for Single Channel Access Control.
  • Due to the operation of this barrier, no springs or counterweights are needed, as it has Heavy Duty Roller Plunger Limit Switches.

Construction and Materials

  • Aluminium Extruded Cabinet
  • Removable Cast Aluminium Hood
  • Heavy Duty Pillar Box Bearing
  • Comes with M12 Anchor Shield Bolts for installation.

Access Control & Other Accessories

From the Access Control Guide below, this Barrier is compatible with the following accessories:

  • GSM Intercom
  • Proximity Access Keypads
  • Reader Pedestals
  • Loop Detectors & Loop Wires
Goods Total
Quantity:
1
Total:
£0.00
£0.00
Total: £0.00