|Sliding Gate Leaf||1|
|Catch Gate Post||1|
|Hinge Gate Post||1|
|Adjustable Gate Eyes||2|
|Ribbed Inserts for Frame and Posts||4|
This 2.0m x 3.0m Single Leaf Prison Mesh Gate can be used to provide a secure entry and exit point for vehicles requiring access to a location. Suitable for installation in fencing structures of the same height, this gate can also keep the site secure without the need for supervision at the site. The most significant feature of this gate is its effective mesh construction. With apertures smaller than other types of mesh, it offers a greater level of security and protection, yet still providing an ample amount of visibility. It has an aesthetically pleasing look and is very safe. Although this gate is appropriate for providing a substantial amount of security, it is generally considered to be more suitable for areas that require a lower level of security measures due to its 2.0m height.
When the gate is shut, you should use the sliding latch bolt and drop bolt provided to secure it. A Heavy Duty Padlock will secure this gate even further and this is available as a customisation option.
is constructed using horizontal and vertical wires, which both have a diameter of 4mm. At 12.7mm high and 76.2mm wide, the apertures within the mesh structure are narrow enough to prevent climbing activity, but at the same time, still provide a great standard of visibility. Prison Mesh is also known as 358 Mesh, which refers to the measurements in imperial units. It is the ultimate choice for high security locations, due to the fantastic strength and rigidity that it offers. Welded at each intersection, the wires are extremely resistant to cutting and vandalism attempts. As with other mesh fencing security solutions, 358 Prison Mesh is an ideal option for a range of areas including police stations and correctional units, commercial establishments, schools and airports.
All our mesh gates are Hot Dip Galvanized, in line with the requirements of BS EN ISO 1461:2009, to offer protection against rust and corrosion. This unique process offers complete coverage and provides maximum protection through a tough and abrasion resistant coating.
Steel being Hot Dip Galvanized progresses through a temperature cycle upon immersion into and withdrawal from the galvanizing bath. Within this dipping process, uneven heating occurs, creating a temperature profile along the part being galvanized. This temperature profile allows the steels internal stresses to be relieved at different times in the immersion cycle. These stresses may cause changes in shape and/or alignment, evident with distortion and warping. Whist we take all reasonable care during the service, we cannot accept liability relating to distortion, buckling, fracture or change in the properties of the goods. Our standard terms and conditions of sale apply at all times.