|Mesh Fencing Posts||1|
|Mesh Fencing Panels||1|
|Mesh Fencing Ribbed Inserts||1|
|M8 x 40mm Bolts||7|
|Mesh Fencing Clips (Black)||7|
The 2.4m high 868 twin wire mesh is comprised of a 6mm diameter vertical steel wire that is pressed between two 8mm diamter steel wires that are running horizontally in parallel to each other. This twin mesh design makes cutting through with standard tools incredibly difficult, which should deter intruders from trying to access your site. The mesh fencing has also been made in such a way as to make climbing difficult, which again, will deter intruders from trying to climb into your fenced in perimeter.
This twin mesh wire fencing comes with the option of either dig in or bolt down posts. A dig in post is a fairly common post type which requires holes to be dug and filled with post mix (sold separately) to support the fencing post. Bolt down posts (+£5.00 each) have been designed with a base plate which is bolted onto hard ground surfaces such as concrete using ground anchor bolts (M16 x 125mm sold separately). This type of post is ideal for locations such as car parks where digging holes may be unwanted.
As a standard, the twin wire mesh system comes with a pre-galvanised and powder coated finish. With this dual layer of protection, this fencing is a strong and robust system for permanent installation that will be highly resistant to weathering effects and other forms of damage such as vandalism.
Purchasing torque bits is highly recommended as they are required when installing the mesh fencing secutrity systems and have been designed to specifically fit the bolts that are included in our mesh fencing kits.
Please note: All of our mesh fencing clips are supplied in Black as standard, should you require the clips to be another RAL colour, please contact us for a quotation.