Gate Type | Single Leaf Gate |
Height | 1500mm |
Access Width | 2.0m, 3.0m, 4.0m, 5.0m |
Total Post Length | 1500mm [Bolt Down]. 2100mm [Dig In] |
Post Type Available | Dig In, Bolt Down |
Material | Galvanised Steel |
PPC Colours | Various RAL Colours Available |
Name | Quantity |
---|---|
Sliding Gate Leaf | 1 |
Catch Gate Post | 1 |
Hinge Gate Post | 1 |
Adjustable Gate Eyes | 2 |
Drop Bolt | 1 |
A stylish, secure and cost-effective access point, these metal bow top gates are available in a range of widths starting at 2.0m up to 5.0m. This makes them ideal for a wide range of applications from front or back garden gates, securing driveways or for preventing unauthorised access to public spaces such as parks at particular times.
Each of these 1.5m high gates are made to meet our highest standards by our team of expert fabricators, providing an incredible level of strength. To make sure that your gate will withstand harsh outdoor conditions, excellent quality galvanised steel has been used to manufacture each gate. The zinc coating provides the steel with a layer of protection against the damaging effects of weathering and rust.
To secure these 1.5m bow top metal gates and prevent them from blowing open, each is supplied with a sliding latch bolt and post catch. To further secure the gates, preventing unauthorised access, a heavy-duty padlock can be used (sold separately). In addition to the latch, each gate is supplied with a drop bolt which can be used to hold the gates open for extended periods of time, or help to further secure the gates closed.
To allow these gates to be installed in as many locations as possible, these high-quality metal railing gates are available with either dig in or bolt down posts.
Bolt down posts – The bolt down posts are designed for locations where the ground may make digging holes either impractical or costly. These posts have a base plate which allow them to be held securely in place with the use of ground anchor bolts (sold separately)
Dig in posts – Dig in posts are ideal for locations where it is possible for holes to be dug. These posts are longer than the bolt down variants, which allows a section of the post to be placed into the hole and secured with post mix (sold separately)
As standard, each of the 1.5m high steel bow top gates have been finished with a high quality zinc galvanised coating. These coatings provide the gates with protection against corrosion due to weathering, as well as giving them an excellent looking silver finish.
If a more colourful gate is required, it is possible to order these gates with a fantastic looking and professionally applied Polyester Powder Coating (PPC). These coatings are available in a wide range of RAL colours which allows them to either blend in with their surroundings, or to make an eye catching access point. As well as looking great, they add an additional layer of protection against weathering and corrosion. (Please note: Lead times may apply, please see the lead times when selecting colours)
In the unfortunate event that the powder coated finishes should become damaged, they can be easily repaired with the use of a touch up spray can. These easy to use paint cans can restore your gates to their former glory whilst also restoring the protection these coatings provide.
An incredibly easy to install safety accessory for your gate. The gate restrainer comprises of a strong and durable stainless steel braided cable which ‘restrains’ the gate leafs, preventing them from falling in the unlikely and unfortunate event that the gate hinges should fail. These can greatly reduce the risk of accident and injury to users who are using the gates, especially in public spaces.
Our friendly and helpful sales team are here to help with any questions or queries you may have regarding these metal bow top railing gates, or any of our other fencing and railing systems, then please get in touch. We can be reached by phone on 01283 512 111, by email at sales@firstfence.co.uk or or through our online live chat system