Gate Type | Single Leaf Gate |
Height | 2100mm |
Access Width | 2.0m, 3.0m, 4.0m, 5.0m |
Total Post Length | 2100mm [Bolt Down], 2700mm [Dig In] |
Post Type Available | Dig In, Bolt Down |
Material | Galvanised Steel |
PPC Colours | Various RAL Colours Available |
Name | Quantity |
---|---|
Sliding Gate Leaf | 1 |
Catch Gate Post | 1 |
Hinge Gate Post | 1 |
Adjustable Gate Eyes | 2 |
Drop Bolt | 1 |
The 2.1m High Single Leaf Standard Vertical Bar Railing Gate kits provide a stylish and functional access point which is available in a range of widths ranging from 2.0m to 5.0m. This makes these steel vertical bar gates ideal for use in home gardens as either front or back garden gates, as well as use in more public spaces such as parks or schools.
Made from high quality galvanised steel, these gates have been meticulously designed and constructed by our team of expert fabricators to ensure that these gates will remain strong and reliable even in harsh weather conditions.
Each 2.1m high single leaf metal railing gate is supplied with a sliding latch gate leaf and a catch gate post. This allows the gate to be secured closed when not in use, which helps to prevent damage to the hinges as well as accidents or injuries from occurring to gate users. The sliding latch can be locked into place for additional security with the use of a heavy-duty padlock (sold separately), preventing unauthorized access.
So that the 2.1m high vertical bar gates can be held open safely for extended periods of time, each gate is supplied a drop bolt. These drop bolts can also be used to further secure the gate when it is not in use.
These 2.1m high steel vertical bar gates are available with either dig in or bolt down posts, allowing them to be installed in a wide range of outdoor locations.
Dig in posts – The dig in posts are designed for use in locations where the ground is soft enough for holes to be dug easily. These posts are longer than the bolt down versions which allows them to be placed into the hole and secured in place with the use of post mix (sold separately).
Bolt down posts – The bolt down posts are suitable for use in areas where the ground surface may be too hard for holes to be dug effectively, such as areas that have been covered in concrete. These posts have a pre-attached base plate which allows ground anchor bolts (sold separately) to be used to secure these posts in place.
Each of the 2.1m high single leaf standard vertical bar railing gates, as standard, are finished with a galvanised zinc coating. This provides the steel with a layer of protection against weathering and corrosion whilst giving the gate an appealing silver finish.
If you should require a more colourful gate system, Polyester Powder Coatings (PPC) are available. These professionally applied coatings are available in a range of RAL colours, allowing them to suit any environment. As well as being fantastic to look at, these coatings add another layer of protection against weathering and rust to the steel.
(Please note: Lead times may apply for PPC finishes, please see the colour options for more information or speak to our helpful sales team for more information and about custom colours)
Touch up spray paint cans are available in the unfortunate event that your PPC finish should become damaged. These easy-to-use spray paint cans can quickly restore the protective coating that PPC provides as well as restoring the looks of your gate system.
Multiple widths available – these 2.1m high single leaf vertical bar railing gates are available in widths starting from 2.0m, up to 5.0m, allowing them to accommodate anything from individual pedestrians to vehicles.
Vertical bar design – A classically stylish vertical bar design allows these gates to blend in and look fantastic in a wide range of outdoor locations
Made to last – Each of the gates has been constructed from high quality galvanised steel by our expert team of fabricators.
Customise your gate with a PPC finish – Add a splash of colour to your perimeter system with a bright and colourful Polyester Powder Coated finish. These are available in a wide range of RAL colours and also provide the steel with an additional layer of protection against weathering and rust.
Gate restrainers offer increased safety to your gates, helping to reduce the risk of accident or injury. These easy to install restrainers are consist of a braided stainless steel cable which attaches to the gate leaf and the hinge post. As the name suggests, the gate restrainers ‘restrain’ the gate leafs, preventing them from falling in the unfortunate event of a hinge failure and causing injury to any gate users near the gate at the time.
Our friendly and helpful sales team are available to help with any questions or queries you might have on these single leaf metal gates, or any of our other fencing and gate solutions. We can be reached by phone on 01283 512 111, by email at sales@firstfence.co.uk or through our online live chat system.